Supported Devices and Platforms
g.Pype runs on Python 3.10 to 3.14 on Windows (x64), macOS (Apple
silicon) and Linux (x86_64). The amplifier drivers come with the devices extra,
pip install "gpype[devices]"; Platform Notes lists what each operating system
asks for before a device opens.
Amplifiers
Device |
Node |
Connection |
EEG channels, rate |
Beside the EEG, where enabled |
Platforms |
Needs |
|---|---|---|---|---|---|---|
BCI Core-4, BCI Core-8, gCore |
Bluetooth Low Energy |
BCI Core-4 and -8: 4 or 8 at 250 Hz; gCore: 8 at 250 or 500 Hz, 4 at 1000 Hz |
none reach the pipeline; the counter and validity flag are consumed on the way in |
Windows, macOS, Linux x86_64 |
Bluetooth permission on macOS |
|
Unicorn Hybrid Black |
Bluetooth (classic) |
8 at 250 Hz, fixed |
accelerometer (g), gyroscope (deg/s), battery, counter, validation; 17 channels in all |
Windows, macOS, Linux x86_64 |
a licensed driver; pairing on Windows |
|
g.Nautilus |
wireless, through its base station and the GDS service |
the headset’s channels; 250 or 500 Hz |
digital input, counter, accelerometer, battery, link quality, validation |
Windows, macOS, Linux x86_64 |
the GDS service |
|
g.USBamp |
USB, through the GDS service |
16, in four groups of four; 256 Hz in the training |
trigger input; a counter replaces one measured channel |
Windows, macOS, Linux x86_64 |
the GDS service |
|
g.HIamp |
USB, through the GDS service |
up to the amplifier’s full count; 1200 Hz in the training |
digital input; a counter replaces one measured channel |
Windows, macOS, Linux x86_64 |
the GDS service |
Every amplifier node does the same things: it is the one source of its
pipeline or one of several, it records its raw stream with --save-as
and replays it with --load-from with no device present, it sends
into LSL or UDP through a sink, it runs as an edge of a distributed
pipeline, and it runs OSCAR artifact removal with enable_oscar=True.
A serial picks one device when several are in range. Each node’s
training episode is in Season 3, and its
reference page lists every parameter.
g.Pangolin connects through a g.HIamp, so GHIamp drives it. Beyond 256 channels it needs several g.HIamps acquiring in sync, which is experimental.
Other sources
Source |
Node |
What it is |
|---|---|---|
Signal generator |
A sine with noise at any rate and channel count; the stand-in for an amplifier in every example that runs without hardware. |
|
Keyboard |
A key press as an event with its code, on every platform; needs a graphical session, and Input Monitoring on macOS. |
|
Marker |
An event your own code emits, |
|
UDP |
Datagrams from any program, such as a stimulus presenter. |
|
Lab Streaming Layer |
Any LSL stream, by name or type: another vendor’s amplifier, MATLAB, a second g.Pype. See LSL Integration. |
|
Recordings |
A file, replayed in real time or run as a batch. See File Formats. |
Paradigm Presenter, g.tec’s stimulus presenter, is driven from a g.Pype window by the ParadigmPresenter widget and sends its stimulus codes over UDP back to that widget, which is also their source in the pipeline; it is a separately licensed product and runs on Windows only.
Not supported
Electrode impedance measurement: removed in 4.0.0; use the amplifier’s own software for it.
Third-party amplifiers: g.Pype ships drivers for g.tec amplifiers only. Another device comes in beside a g.tec amplifier, as the licence asks: as a source you write, a
gp.Sourcesubclass (Season 7, Episode 3), or as a stream through LslReceiver or UDPReceiver. A pipeline also runs on the Generator with no hardware at all.